Unbrick Hardbrick Redmi 3s Testpoint Method

How To Unbricked Hardbrick Xiaomi Redmi 3s/Prime/3x Latest

Warning!!!
This tutorial for Hardbricked device only!

Please install Miflash first You need to do this way JUST if your device can't boot and not recognized by MiFlash as it should be
how to know if your device is hardbricked?
Plug your device to USb and PC open your device manager and you'll see like this "diagnostic 900E" or "QHSUSB_BULK" if driver not installed

Xiaomi diagnostic 900E
What you need


Step by step
1. Disassembly your device to get testpoint
2. Connect testpoint
test point xiaomi redmi 3s/prime/3x unbrick method

3. Plug usb cable to your Pc and phone and your Redmi 3s detected as EDL mode
Xiaomi 900E to QDLoader 9008

4. Install qualcomm usb driver
5. Open Miflash and select target folder to extracted fastboot rom
6. Choose Clean all option and Flash

Enjoy your coffee and wait until flashing success

0 Response to "Unbrick Hardbrick Redmi 3s Testpoint Method"

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel