Penelusuran Sponsor

How To Unbrick Flashing Mediatek Android Devices

Below are the guide to Flash Stock or Custom ROMs Mediatek using SP Flash Tool on Windows Computer. 

Flashing Mediatek Smartphone

Download Tool Needed 
  • SP Flash tool - New Sp Flash Tool v.5.16 here Or V.3.13 here
  • Android ADB And MTK Usb Vcom drivers - Auto Installer here 
  • Stock or Custom Rom you want to flash on your Smartphone. Make sure you have download the exact Rom of your phone ( search on this site or
  • Laptop or Desktop Computer
  • USB Cable for communicating between PC and Smartphones

Flashing Installing Stock/Custom Rom With SP Flash Tool

Disclaimer: DWYOR (Do With Your Own Risk). 

  • Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (ignore this step 1, for phones with built in battery).
  • Now connect or reconnect the USB cable to the phone with the PC while the phone is still off, Windows should pop up and begin to install the MTK65XX Preloader Drivers, this only happens if you installed the Mediatek Preloader USB Drivers correctly in Windows. After they successfully installed, disconnect the USB cable again. 
  • Extract SP Flash tool on your computer and launch it.
  • Open the folder you extract it to and locate flash_tool, double click on it to open. 

  • Once it is launched, hit the Scatter-loading button

  • Locate the scatter file in the firmware or Rom of the phone that you downloaded. It's usually a text file like "MT6572_Android_scatter.txt". (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable).

  • Hit the "Download' button in SP Flash Tool to begin the flashing process, if erro you can select firmware upgrade on selections box.

  • Connect your Smartphone to the computer with a USB without battery, if possible to remove. Press, Vol Down or Up (other combinations key to enter boot mode) so that the computer can easily detect the phone.
  • Once the Flashing is complete you will see a green circle confirming... With Download OK

  • Close the SP Flash Tool and disconnect your phone from the computer.

If your phone stuck logo / bootloops, remove battery and boot into recovery mode (Vol Down or Up or other combinations key). Factory reset the phone.

Post a Comment