Penelusuran Sponsor

Flashing Backup Watch Phone MTK62xx,MTK25xx

Tutorial backup and flashing smartwatch / Watch Phone Devices and firmware collection MTK Watch Phone firmware download Already Tested for mtk6260 mtk6261 mtk2502C and mtk2502A

Flahing SmartWatch Clone MTK
Many Variant SmartWatch / Phone Watch Cognos, ZGPAX, I-One, Onix, Type DZ09, U8, U11 And Much More.


Backup Your Feature Watch Phone / SmartWatch MTK

What you need before start?
  • PC or laptop (windows)
  • USB cable
  • Driver
  • Flashtool
  • Firmware Chose one of the same type your MTK SmartWatch
On phone dialer press *#8375#
Write down all version summary info and keep it save for future reference
Write down your imei number by pressing *#06# and keep it save for imei recovery.
Download Link Firmware Below: 

Create Read Back ROM Dump / ROM Backup Smartwatch Phone:

  • Extract the downloaded package and install the required drivers provided inside the Drivers folder.
  • Once all the drivers are installed, open the Flashtool folder and runFlash_tool.exe as administrator.
  • Click on Download Agent and choose MTK_AllInOne_DA.bin provided in the package.
  • Now Click on Scatter/Config File and choose your-download.cfg from firmware folder.
  • Now click on Read Back tab and Remove the existing Read Back tasks and click on Add and then Double-click the task and choose the directory where you would like to save the ROM dump.
  • Now a popup should show up asking Start Address and Length, leave Start Address as default (i.e., 0x00000000) and in the Length field type 0x01000000
  • Click on Read Back button.
  • Power off Watch phone and connect it to PC via USB Cable.
  • Wait for the Flashtool to detect the watch and start the Read Back process.
  • Once done you will see the Green circle.
That’s it now you have successfully created Read Back ROM Dump of MT62xx MT25xx Smartwatch Phone. Now it’s time to extract the ROM Dump to obtain the firmware files.

Extract Read Back ROM Dump or ROM Backup:

  • Download the Iniversal Read Back Extractor from the above downloads section.
  • Extract it to the folder where you have saved the ROM Dump.
  • Run Read Back Extractor and click on Load ReadBack file and choose the ROM Dump which you have created earlier.
  • Once the file is loaded, hit Rebuild Firmware and wait until you see Done message.

With this you are done with extracting the ReadBack ROM Dump MTK Watch.

Have issues following the steps above, then watch the video below to understand the whole process.

Post a Comment