many sellers gave the wrong specifications for this devices dz09 Mt6260 164ram + 64rom.
.Actually is MT6261 32mb + ram 32Mb rom.
Backup Firmware
GPLUS61A_11C_NX9_PCB01_GPRS_MT6261_S00.NX9_61D_240_V2_1_K09D_32_T3_L3_C4_G4_B_160307
--------------------------
Update Link Many Firmware And Tutorial Here
DISCLAIMER
FLASH WITH YOUR OWN RISK!!!
I WILL NOT BE RESPONSIBLE FOR ANY NON FUNCTIONAL AND DAMAGES TO YOUR DEVICE HARDWARE AND SOFTWARE
Preparation:
What you need before start
- PC or laptop (windows)
- USB cable
- Driver
- Flashtool
- Firmware MTK6261 32MB
- Serial Number Writer Tool (for those who are lost imei number)
- REadback Extractor
Getting started
1. On phone dialer press *#8375#
2. Write down all version summary info and keep it save for future reference
3. Write down your imei number by pressing *#06# and keep it save for imei recovery
Installing Driver
1.On your computer install com port driver for your DZ09 (come with flash tool download above)
3. Turn off your DZ09 before connect to the PC via USB cable
4. Connect USB cable
5. Wait till computer installing new com port
6. If it fail to install due to device auto disconnect, disconnect USB cable from device. Run Flashtool.exe
9. Connect USB cable to device and wait till the pc installing the port automatically.
10. After success installing driver Flashtool will test your ram. Wait till circle green popup. Then disconnect your device. This method is used for holding the port while windows working for driver installation.
Now the driver is already for flashing process.
.... REady To Backup And Flashing !!!
Update Link All Version DZ09 SmartWatch Mt6261 32mb Firmware
download here
1 Comments
po celej procedure hodinky už nejdu vobec zapnut, Ani ked ich dam na nabijačku tak nebeži nabijanie. Poprosimu riešenie na jancorichard@gmail.com Dakujem
ReplyDeleteDo Not Send SPAM Link !!!!